Acadia 1G 8-Port Ethernet Media Module

The 1 Gigabit Ethernet Module is intended to be used either as backbone connections between switches or, increasing, to connect directly to Client PCs. The module is available with both optical and electrical interfaces.

Highlights
• Inband, line-speed, routing.
• IEEE 802.3x full-duplex flow control. This allows the switch ports to send a pause command before input buffers overflow. Half-duplex ports support active backpressure (jamming).
• VLAN trunking or non-tagged access modes. This allows the switch ports to interoperate with popular tagged trunking schemes used by other vendors.
• Priority Queuing and Class of Service. These features allow you to prioritize traffic between particular stations or sets of stations to support jitter-sensitive applications.

1000Base-TX with RJ-45 connectors

1000Base-SX with SC GBIC connector

Layer 3 Features
• Internet Protocol (IP) v4, Internetwork Packet Exchange (IPX), and AppleTalk routing
• IP routing protocols: – Open Shortest Path First (OSPF) v2 – Routing Information Protocol (RIP) v1/v2
• 16,000 routes
• 24,000 Address Resolution Protocol (ARP) table entries
• IP multicast routing:
    • Distance Vector Multicast Routing Protocol (DVMRP)
    • Internet Group Management Protocol (IGMP) v2
    • IGMP v2 snooping
    • Cisco Group Management Protocol (CGMP)
• IP resiliency:
    • Virtual Router Redundancy Protocol (VRRP)
    • Internet Control Message Protocol (ICMP) router discovery
• IP filters: 512 ACLs; actions: prioritize, drop, and forward
• Differentiated Services (DiffServ)

Layer 2 features
• 24,000 MAC addresses
• Spanning Tree per VLAN
• Rapid Spanning Tree Protocol (RSTP)
• IEEE 802.1Q: 512 VLANs, port-based VLANs
• IEEE 802.1p with eight hardware queues
• Ethernet link aggregation
• Rate limiting per port
• Broadcast and multicast limiting

Network Management Software
• Network management software
• Web-based network management interface
• SNMP v3
• Lightweight Directory Access Protocol (LDAP) client
• Telnet
• RS-232 and 10Base-T in-band
• Mini-RMON
• Port mirroring
• Remote Authentication Dial-In User Service (RADIUS) Client
• MIB support:
    • LEC MIB
    • RFC 1483 MIB
    • MIB II

Interfaces
• 1000Base-TX with RJ-45 connectors
• 1000Base-SX with SC GBIC connector
    • Wavelength: 850 nm
    • Maximum distance: 550 m (1,804.46 ft) over 50 µm multimode fiber (MMF); 275 m (902.23 ft) over 62.5 µm MMF
• 1000Base-LX with SC GBIC connector
    • Wavelength: 1310 nm
    • Maximum distance: 5 km (3.1 mi) over 9 µm SMF
• 1000Base-LH with SC GBIC connector
    • Wavelength: 1550 nm
    • Maximum distance: 70 km (43.49 mi) over 9 µm SMF

GBIC Connectors
Gigabit Interface Card (GBIC) connectors are are used for the optical interfaces. They come in the following types:
• SX (550m-capable)
• LX (10km-capable)
• SLX (25km-capable)
• ELX (70-100km-capable)